It is possible to stream to YouTube directly using the CM60-ip series cameras:

You’ll need the following settings:

  • 1920 x 1080 (or any other supported resolution)
  • Bitrate 4500 - 9000
  • I-Frame every 2 seconds
  • Audio codec: AAC or MP3
  • Constant Bitrate

  • Make sure the camera has DHCP enabled or is able to access the internet through a fixed IP address. In this case a google DNS server is used (
  • The streamname is pasted into the link of the url. 
  • Audio encoding has to be ON!
  • reboot the camera after making these settings, and you should be live on youtube.