This solution describes how you can achieve low-latency decoding using a free software tool called IP Camera Viewer, which can be downloaded here: https://www.deskshare.com/ip-camera-viewer.aspx
- Download and install IP Camera Viewer
- Run the program
- Click [ Add Camera ]
- enter the IP address of the camera and change the port to 2000
- enter the credentials (default user: admin Password: admin)
- Test the connection and you should get a small preview
- Click OK
If you want to monitor multiple cameras at the same time, just add more cameras, it will automatically switch to a multiview window.
To control any of the cameras in the multiviewer, simply click on one of the previews and a small 4-point control button will show. Use this to control that camera.