Using the IR remote, press the following button combinations subsequently to control certain parts of your camera.

[*] → [＃] → [CLEAR PRESET]: Erase all the presets

[*] → [＃] → [1]: Reset the OSD menu to English

[*] → [＃] → [4]: Show IP address and network settings

[*] → [＃] → [6]: Restore Factory defaults

[*] → [＃] → [8]: Show the camera version on-screen

[*] → [＃] → [9]: Flip the image

[*] → [＃] → [F1]: The camera is set to IR channel 1.

[*] → [＃] → [F2]: The camera is set to IR channel 2.

[*] → [＃] → [F3]: The camera is set to IR channel 3.

[*] → [＃] → [F4]: The camera is set to IR channel 4.