(Video in English, French and Spanish)





Set Preset

Set the camera in the desired position, then press the [SET] preset button (key light on) and the Position Key [0~9]. 

(Preset 0 is the preset to which the camera automatically goes after a reboot). 

Save different presets with different positions (10 presets maximum). 

To return to normal operation, press again the [SET] preset button (key light off).


Call Preset

Press the Position Key [0~9] of the desired preset, in total 10 presets (including preset 0) are available per camera through the AV-CON-300-IP.

(From the controller you can call for presets that have been set from the camera's web GUI and/or the IR remote control, because all the presets are stored inside the camera itself, 255 presets at maximum)


Delete Preset

Press the [RESET] preset button (key light on) and the Position Key [0~9] that you wish to delete. 

To return to normal operation, press again the [RESET] preset button (key light off).