(Video in English, French and Spanish)

How to create/add a custom camera IP address to the CON300-IP controller:

1. Open the menu by pressing [MENU].

2. Select ‘Visca over IP’.

3. Select ‘Add New Custom Address’,

4. Enter the compatibility mode (STANDARD for Avonic cameras), click the [JOYSTICK BUTTON] to confirm.

5. Select the Transport Protocol, click the [JOYSTICK BUTTON] to confirm.

6. Enter the Port Number using Position Key [0~9] (standard setting is 1259), click the [JOYSTICK BUTTON] to confirm.

7. Enter the IP-address of the camera using Position Key [0~9], click the [JOYSTICK BUTTON] to confirm the selection.

8. A message on the display pops up with the text ‘A new camera has been added’.

How to select and control your added camera:

Click the ADDR button and select your camera from the camera list (shown on the display), click the [JOYSTICK BUTTON] to confirm your selection (the camera IP address should be shown on the display). Now you can control your camera with the joystick.