Avonic and BOSCH have worked together to validate and thoroughly test the Avonic CM40-IP and complete CM70 series in conjunction with the BOSCH CCS 1000D, DICENTIS wired and Wireless system. This means that Avonic cameras can now be used in combination with these systems.
They can now be fully integrated within the BOSCH software and CCU devices allowing for:
-Live streaming to the delegate devices
-PTZ manual camera control and full automatic camera control (recalling presets)
-Auto discovery of Avonic cameras within the software and CCU.
-Full Camera configuration
Avonic cameras support ONVIF profile S and are running version 2.41. The models AV-CM70-IP, AV-CM71-IP, AV-CM73-IP, AV-CM40-IP are compatible with:
-BOSCH CCS 1000 D
-BOSCH DICENTIS wired
-BOSCH DICENTIS wireless
Bosch Dicentis prefered settings
Encoder settings
Compressed format | H.264 |
Profile MP | MP |
Image Size | 1280x720 |
Rate Control | CBR |
Bit Rate | 2500Kb/s |
Frame Rate | 60 |
I Frame Interval | 15 |
I Fram Min QP | 15 |
Network Settings
Bosch prefers to work with DHCP enabled, even when no DHCP server is available and all equipment uses their IPv4 Link Local fall back address in the range of http://169.254.xxx.xxx and subnetmask 255.255.0.0..
Known issues on ONVIF
Issue: If the Camera name in the WebGUI is set to a name with spaces, it will not be detected by ONVIF (either in ODM or in Dicentis).
Solution: do not use spaces in the camera name
* https://avonic.com/bosch-avonic/
* PDF available in attachment