Each camera is provided with an On-Screen Display (OSD) Menu:

The OSD Menu is an integrated on-screen menu that can be accessed within the camera to change specific functions that effect how the camera processes an image. The OSD Menu is visible only on the CM40, CM7x, and CM9x HDMI and SDI outputs (not on its USB or IP output, nor on the live preview in the web GUI), and only on the USB output of the CM41 and CM44 videoconference cameras. (In the case of the box camera CM60-IPX-BOX the OSD is visible on both its SDI and IP outputs)

The OSD menu can be accessed by the Remote Control or an Avonic PTZ controller (it is also possible to open it from an IP/Serial command)

- By pressing the MENU button on the camera remote control:

- To open the CM7x OSD menu from the CON300-IP controller refer to How can I open the OSD of my camera with my CON300-IP controller?

- On CM7x, it is possible to open/close the OSD menu by IP/Serial command:

* OSD navigation and options (here of the CM7x-IP):