CM4x, CM7x, & CM9x series have by default the static IP address  192.168.5.163, but you can configure a different IP address, Subnet mask and gateway in the camera Web gui (NETWORK tab > Ethernet) and press the SAVE button. Then reboot the camera to take effect (SYSTEM > Reboot) :

Ethernet Settings

* Note that this cannot be done via OSD (On-Screen Display)



It is also possible to set the IP configuration by HTTP API (for more details, refer to the camera User manual > How to use HTTP API):

HTTP API


* How to open the camera's web gui?

* How do I know the IP address assigned to my camera?