Getting Started

This guide helps you correctly mount Avonic PTZ cameras, Follow these essential steps to ensure proper installation:

  • Use appropriate mount type for your camera model.
  • Ensure stable wall or ceiling surfaces before drilling or mounting.
  • Align the mount holes using the template provided to avoid misalignment.
  • Use the correct screws and anchors as listed in the manuals to ensure safety.
  • Confirm all cabling (e.g., PoE, SDI, HDMI) is in place before fully attaching the camera to the mount.

TABLE OF CONTENTS

Select the right mount

Wall Mounting Instructions

The following images show the complete process to mount the MT200 or MT220 wall mount brackets:

Mounting on a Wall Instructions

Screws Instructions

Mounting the Camera Instructions

Cable Cover Instructions

Cover Cap Instructions

Installation Instructions

Screwing Instructions

Process Instructions

Process Instructions Step 2

Process Instructions Step 3

Final Assembly

Ceiling Mounting Instructions

The steps for installing ceiling mounts using the MT250 bracket are visually identical to part of the wall mount process and reuse images as follows:

Installation Instructions (Ceiling)

Screwing Instructions (Ceiling)

Process Instructions (Ceiling)

Process Instructions Step 2 (Ceiling)

Process Instructions Step 3 (Ceiling)

See Also

This guide is a brief summary of the main manual, found on our website.


Take the following precautions to prevent the Product from falling down which may cause injuries:

  • Set up this Product on a hard, stable surface, or mount it to a wall or ceiling.
  • ONLY use an Avonic mount for mounting to a wall or ceiling.
  • Ensure the mounting construction is capable of supporting four times the weight of the Product. (See 'General Specifications > Weight product’ in the Product Datasheet for the exact weight.)
  • Use a safety loop or drop protection that prevents the Product from falling if the mounting construction fails.
  • During mounting and installation, NEVER install a Product above a person.
  • Check the installation at least once a year. An improper mounting could cause the unit to fall off, resulting in personal injury.

Mounting and Installation

This chapter outlines how to mount and install the Product in a correct and safe manner.

These steps are subdivided into the following groups, each of which is documented in a separate section:

  1. Mounting on Wall or Ceiling
  2. Connecting the Components to the Camera
  3. Connecting a Controller to a Camera
  4. Connecting the camera to a local network

Take the following precautions to prevent the Product from falling down, which may cause injuries:

  • Set up this Product on a hard, stable surface, or mount it to a wall or ceiling.
  • ONLY use an Avonic mount for mounting to a wall or ceiling.
  • Ensure the mounting construction is capable of supporting four times the weight of the Product. (See 'General Specifications > Weight product’ in the Product Datasheet for the exact weight.)
  • Use a safety loop or drop protection that prevents the Product from falling if the mounting construction fails.
  • During mounting and installation, NEVER install a Product above a person.
  • Check the installation at least once a year. An improper mounting could cause the unit to fall off, resulting in personal injury.

Mounting on Wall or Ceiling

The following accessories (AV-MT300) are separately available if the client wants to mount the camera to the wall or ceiling. Contact your Avonic reseller or local distributor for purchasing details.

Wall and Ceiling mount (AV-MT300)

SKU white: AV-MT300-W
SKU black: AV-MT300-B

Visit www.avonic.com to download instructions for mounting the camera to wall or ceiling using the accessory AV-MT300.


Dimensions CM30/40/70/80