3.1.3. Release: Januari 13, 2026

Platform

This update is available on the CD600 only

Feature implementations

  • added the option to implement the CM32 camera model
  • added HEX API possibility
  • added the option of a demo/ emulated microphone with randomized sounds for demonstration ends
  • added the option to use a black screen as holding screen on the switcher page
  • Live footage is seen on the switcher page 
  • added the option to switch while in edit mode in order to choose which scenario or preset the system starts with  

Stability improvements

  • improved image quality during creation of presets
  • added flush tracking memory command for improved Conference Tracking behavior of CM93
  • Partial refactor in preparation for the release of the IP videoswitcher

Known issues

  • none

2.11.4 Release: November 27, 2025

Platform

This update is available on the CD500 only

Stability improvements

  • Added support for lower camera bitrates to improve performance in challenging network conditions.

Known issues

  • When configuring DHCP, the reboot is not always triggered automatically
  • Sometimes the preview of a camera during the preset creation can be of low quality
  • HEX api not fully functional yet
  • After update, version is incorrectly displayed as 0.0.474 instead of 2.11.1

2.11.3 Release: November 19, 2025 - final joined update for CD500 and CD600

Platform

This update is available on both CD500 & CD600.

Improvements

  • implemented a reboot schedule for the CamDirector and connected cameras
  • a disconnected camera does no longer lead to a partially frozen HDMI output

Stability improvements

  • Improved rebooting logic
  • optimized caching

Known issues

  • When configuring DHCP, the reboot is not always triggered automatically
  • Sometimes the preview of a camera during the preset creation can be of low quality
  • HEX api not fully functional yet
  • After update, version is incorrectly displayed as 0.0.474 instead of 2.11.1

Notes

  • last combined release for CD500 and CD600, future software releases will be issued individually for the CD500 and CD600.

2.10.0 Release: Oktober 20, 2025

Improvements

  • Heatmap improvements

Stability improvements

  • Improved preset creation process
  • optimized bandwidth usage

Known issues

  • When configuring DHCP, the reboot is not always triggered automatically
  • Sometimes the preview of a camera during the preset creation can be of low quality
  • HEX api not fully functional yet
  • After update, version is incorrectly displayed as 0.0.439 instead of 2.10.0

2.8.0 Release: August 1, 2025

Feature implementations

  • Configuration of director settings (minimum cut speed, silence treshold, ranking speed) 
  • Addition of a heatmap 
  • Possibility to disable objects temporarily
  • live logging console 

Improvements

  • Room editor images have been slightly improved/ updated
  • improved camera cones colouring
  • added automated scenario validation to prevent it running without assigned seats
  • improved shot framing consistency

Stability improvements

  • fixed a DHCP UI button bug
  • improved stability of output stream

2.6.7 Release: June 20, 2025

Feature implementations

  • WebGUI, added sub-stream instructions at camera setup.
  • WebGUI, added green ring around the active speaker.
  • Allow bitrate to be configured between 8 and 15mb/s.

Improvements

  • WebGUI, changed cone color of active camera to green.
  • Framing size in automated scenario slightly improved while using cameras at different distances.
  • Switching speed increased, allowing for more screen time for active speaker.
  • Refined predictive algorithm.
  • Camera returns to home position after switching, preventing tracking 'hijacking'.

Stability improvements

  • Audio Technica microphone stability improvement.
  • Several further stability improvements.

2.6.1 Release: May 26, 2025

Feature implementations

  • predictive algorithm implemented to improve switching times.
  • tracking option available in Automated Scenario (exclusive for CM93 with active tracking license).
  • VPN option added for improved remote support.
  • API call to find out which seat is active (speaker idenitification).

Improvements

  • improved Visca communication.
  • various bug fixes.
  • UI design improvements.
  • fixed a bug where on rare occasions the camera status would be identified incorrectly, leading to slow switch times.

2.4.1 Release: March 11, 2025 

Feature implementations 

  • Yamaha RM-CG Ceiling Microphone integration. 
  • Implementation of an API call to be able to find out which camera is active on the HDMI output of the CamDirector.

Stability improvements

  • Use of a proper fallback IP address if the connection to the DHCP server has been lost. Continuous checking for a DHCP server, and listen to an assigned DHCP address when the server comes back online. 
  • Remember last used scenario when restarting software. 
  • Various stability improvements.

2.3.0 Release: January 24, 2025 

Feature Implementations 

  • added the Sennheiser TCCM microphone. 
  • added the Shure smart speech settings to the Web UI. 
  • added Tracking (No Zoom) option for CM93.

Stability Improvements

  • Software reutrns to the same Live status after a reboot. 
  • Improved handling of disconnected camera.
  • HTTP API improvement.
  • Expanded the devices page with more information.
  • Chair zone settings improved.
  • improved logging of encountered bugs.
  • various database improvements.
  • incorrect API password for micorphone is visible in devices list.
  • improved communication of the Sennheiser TCC2 microphone.

Known issues

  • tracking of CM93 is not available for the automated, AI generated scenario.