Getting Started

This article explains how to activate licenses for additional features on Avonic CM70- and CM93-series PTZ cameras via the WebGUI. By following the steps in the correct order, you ensure that the activation process runs smoothly and without errors.

  • Update the camera to MCU and Camera firmware version 1.1.4 or later. Only then will the System → License page be available.
  • Locate the unique MAC address of your camera (box label, sticker under the camera, or WebGUI: Network → Ethernet).
  • Connect the camera to the network and access the WebGUI.
  • Go to SYSTEM → License, enter the license key, and click SAVE.
  • Refresh the page (F5) or log out/in again to complete the activation.

Available Licenses

Avonic offers feature licenses to unlock advanced functionality per camera model.

CM70-series

  • Tally light (via serial or IP control)
  • Customizable Color Matrix (CCM)
  • SRT streaming

CM93-series

Finding the MAC Address

Licenses are valid for one camera and require its MAC address. This can be found:

  • On the product box
  • On the sticker under the camera
  • In the WebGUI under NetworkEthernet

WebGUI Ethernet settings showing MAC address

Entering a License Key

Once you have your license key, activate it in the WebGUI:

  • Navigate to SYSTEM → License
  • Enter the license key and click SAVE
  • Refresh the page or log out and in again

License entry in WebGUI

No reboot is required. After saving, the new feature tabs (e.g. CCM or SRT) become visible automatically.

Important Notes

  • After a factory reset, all licenses are removed and must be re-entered.
  • Only CM70-NDI cameras show “NDI Tally Light” in the WebGUI.
  • CCM and SRT options appear only after successful activation.

Activating Tracking (CM93)

Tracking is an advanced, license-protected feature on the CM93 series.

Steps

  • Update to MCU and Camera firmware version 1.1.4 or later. Firmware is available on the Avonic website (see also System > Update).
  • After the update and reboot, go to System > License and enter the purchased code.
  • Click SAVE, then refresh the WebGUI or log out/in to enable the Tracking tab.

Tracking license entry in CM93 WebGUI

WebGUI Reference

WebGUI SYSTEM > License overview

Enter your license key in the field and click SAVE. Refresh the webpage or log in again to activate the feature.

Obtaining a License

  • Licenses are visible and usable from firmware version 1.1.4 onward.
  • They can be purchased through your local sales channel or directly from Avonic.