Update
Figure 46: WebGUI > SYSTEM > Update
By default, this screen shows a readout of the current firmware versions. The Update file provides a firmware upgrade functionality via this screen. When the camera is done uploading and processing the update, it will automatically reboot.
Execute the following steps to perform a firmware upgrade.
Click Choose File to select the firmware update file.
Click UPGRADE to start the firmware upgrade wizard.
Follow the steps in the wizard. Wait until the process finishes and reboots.
Refresh your browser and log in again after the reboot.
Firmware update failed
Check firmware file integrity, download it again.
Make sure you are trying to flash the UVC file for the correct color camera (ARM is generic, UVC is color-dependent).