Introduction

This document explains the firmware releases done for specific Avonic controller models. It contains different release versions that correspond with the versions mentioned in the Webgui. In this document is described what is new to the firmware of the controller and what changes are made to that firmware. There is also a history of the firmware changes started with the (date) of the latest release and followed by older ones.
The new firmware itself can be found at the Controller product page on the Avonic website.

Release notes 17/04/2026

Release date:
17/04/2026

Applicable models:

• AV-CON400

Release name:

• CON400_V0.0.82

Changes:

• OSD Menu button function fixed 
• Enable external system control by Visca over IP
  See below: 
  

  
  

  Camera select: 

  8x 01 7E 01 00 0n FF

  • 0n = 01–07

  • 01 → Camera 1

  • 02 → Camera 2

  • 03 → Camera 3

  • 04 → Camera 4

  • 05 → Camera 5

  • 06 → Camera 6

  • 07 → Camera 7

  Example (Select Camera 3):

  
  

  81 01 7E 01 00 03 FF

Known issues:

File: CON400_V0.0.82_20260417.up

Copyright © 2026 AVONIC All Rights Reserved.

The information contained in this Release Note is subject to change without notice.

For any questions or suggestions, contact your reseller or local distributor of Avonic. Visit the Avonic website www.avonic.com to find your local Avonic distributor or to download the most recent version of the documentation.