FAQ's

Why doesn't my CM70 series camera respond to the power on command over IP?
The Avonic CM70 series cameras are designed to consume very little power in stand-by mode. To achieve this, some features within the camera are completely s...
Mon, 22 Mar, 2021 at 3:03 PM
Is it possible to control the PTZ speed when recalling a preset?
Yes, it is possible to define how fast the camera moves between presets.  Simply navigate to the System --> P/T/Z menu and define the individual speeds f...
Mon, 22 Mar, 2021 at 3:08 PM
Why is my camera out-of-focus?
There are several things to look at when facing issues with the auto-focus of the camera. First of all, please check if the camera actually is set to auto...
Mon, 22 Mar, 2021 at 4:05 PM
How do I setup my PC's network?
Depending on the device you're trying to reach and the IP address it is set to, you would need to change some settings on your PC accordingly. In this ...
Wed, 31 Mar, 2021 at 9:11 AM
How to update a CM40 or CM70 series camera
This brief overview explains the process of updating your CM40 or CM70 series cameras.  First of all, located the firmware for your specific product on...
Tue, 30 Mar, 2021 at 1:26 PM
Do I need an additional license to enable NDI on my CM70 series camera?
The short answer is no.  A non-NDI AV-CM70-IP series camera cannot be upgraded to support NDI. You actually need to buy the AV-CM70-NDI camera. This cam...
Thu, 1 Apr, 2021 at 8:19 AM
How do I change the HDMI or SDI output resolution of my camera?
Sometimes you find yourself in a situation where the camera is set to a certain resolution, which is not supported by the monitor or TV you're currentl...
Thu, 1 Apr, 2021 at 8:37 AM
How do I set up my MAC's network?
Depending on the device you're trying to reach and the IP address it is set to, you would need to change some settings on your MAC accordingly. In this...
Fri, 25 Jun, 2021 at 3:06 PM
How do I set up and control multiple Avonic cameras using the CON100 controller
In this example we're going to install two cameras with Visca addresses 3 and 5 to camera numbers 1 and 2 on the Avonic CON100.  Begin to set the Visc...
Thu, 3 Jun, 2021 at 1:57 PM